Product Ref SR 3

The UTX-P1 is a plug-on transmitter to convert a wired microphone into a wireless microphone.

Plug-on transmitter designed for use with the UWP Series tuners
Operates over a wide 24 MHz frequency band within the range of 838 MHz to 862 MHz
Converts a wired microphone to a wireless microphone via an XLR connector
Compact and lightweight body provides balanced handling
Attenuator function allows adjustment of the microphone-input level
Durable connecting mechanism with a microphone for dependable operation
50 mW RF power output for stable and long-distance transmission
MIC/LINE input level switchable
A backlit LCD provides extensive information, including the operating channel number and frequency in MHz, attenuator level, audio-input status, RF-output status, transmitterbattery status, and accumulated operating time
An LED indicator for audio-input status
Approximately six hours of continuous operation with two AA-size alkaline (LR6) batteries
Supplied with a soft case

Technical Specifications

Please be aware that the features/specifications can differ from country to country
Collapse all

Oscillator
Crystal-controlled PLL synthesizer

Type of emission
F3E

Carrier frequencies
838 MH to 862 MHz (TV channels 67 to 69)

RF power output
50 mW

Antenna
Integral type

Pilot tone signal
32 kHz

Frequency response
50 Hz to 18 kHz (typical)

Reference deviation
±10 kHz (-60 dBV, 1kHz input)

Signal-to-noise ratio
60 dB or more (±10 kHz deviation at 1 kHz modulation, A-weighted)

Audio attenuator adjustment range
0 to 21 dB (in 3 dB steps)

Indicators

LCD:
Operating channel number/frequency, attenuator level, audio input status, RF-output status, transmitter battery status, and accumulated operating time

LED:
Audio-input status

Power requirements
DC 3.0 V (with two AA-size batteries)

Battery life
Approx. 6 hours with Sony AA-size alkaline (LR6) batteries at 25 °C (77 °F) at 50 mW output

Dimensions (W x H x D)
44 x 99 x 36 mm (1 3/4 x 4 x 1 7/16 inches)

Mass
Approx. 185 g (6.5 oz) including batteries

Audio input level

MIC input position:
-60 dBV (at 0 dB attenuator level), LINE input position: +4 dBu

Audio input connector
XLR-3-11C type