Product Ref SR page 2

SONY UWP-V1 (UWPV1, UWP-V1) radio microphone system

Belt-pack Transmitter & Portable ENG Receiver
The new UWP range has updated user functions, all metal casings, backlit displays and much more - providing the user with a compact, rugged wireless microphone system for use with any camcorder or as a stand alone system.

The new UWP-V1 system comprises of a portable/camera mountable receiver and a belt-pack transmitter. Also included in the pack are all the necessary accessories to provide a fully operational wireless microphone system.

Teaming "plug and play" simplicity with stable performance and extended battery life, there is a complete range of Sony wireless transmitters and receivers to meet the needs of ENG/EFP, presentation and live performance.

If you're looking for all the benefits of interference free wireless operation at an affordable cost, finding the perfect solution is now easier than ever before with the adaptable new UWP range. Just select one of the turn-key packages comprising microphone, transmitter and receiver - the user will enjoy superb performance right out of the box, with professional features usually found only on far more expensive wireless systems.

Sony UWP-V1 (UWPV1, UWP-V1) radio microphone system with belt-pack transmitter / receiver and lavalier microphone

New Design
The updated UWP range features an all new design that makes it smaller and thinner that the original models.

All metal body
The new UWP range of transmitter & receivers have all metal casings to provide even greater robustness.

New backlit displays
Both the transmitter and receiver have an easy to read LCD display that make operation and monitoring of the system very simple. The displays have a variety of modes that allow for different forms of information to be displayed dependant on the users preferences. In addition, the new UWP range LCD displays are backlit to be easily readable even in lowlight situations.

Auto channel scan
The auto channel scan allows the user to find available frequencies to use within the operating frequencies of the system.

Pre-programmed channel plans
The UWP system has built-in channel plans that permit the user to quickly and easily find a set of frequencies that will not cause interference. This is especially important when working in an RF hostile environment.
Technical SpecificationsPlease be aware that the features/specifications can differ from country to country
Collapse all

Technical Specifications

UTX-B2 Belt-pack Transmitter

Operating frequencies CE
798 MHz - 822 MHz
838 MHz - 862 MHz

Operating frequency band CE
24 MHz BW

Pre-emphasis
50 microseconds

Frequency response
40 Hz - 18 kHz

RF power output
30 mW / 5 mW

Audio attenuator adjustment range
0 - 21 dB (in 3 dB steps)

Audio input connector
3-pole mini jack

Power requirements
DC 3.0 V (two LR6/AA size alkaline batteries)

Battery life
Approx. 8hours with Sony AA-size alkaline (LR6) batteries at 25?(77?F )at 30 mW output.

Dimension (W x H x D) *excluding the antennas
63 x 82.5 x 18.7 mm (2 1/2 x 3 1/4 x 3/4 inches )

Mass * including batteries
Approx. 145g (5.1oz)

URX-P2 Portable Receiver

Operating frequencies CE
798 MHz - 822 MHz
838 MHz - 862 MHz

Operating frequency band CE
24 MHz BW

Type of reception
Space diversity

Frequency response
40 Hz - 18 kHz

Signal-to-noise ratio
60 dB or more (±5 kHz deviation at 1 kHz modulation, A-weighted)

Reference deviation
±5 kHz (at 1kHz modulation)

Audio output and headphone connector
3-pole mini jack

Power requirements
DC 3.0 V (two LR6/AA size alkaline batteries)

Battery life
Approx. 6 hours with Sony AA-size alkaline (LR6) batteries at 25 °C (77°F ).

Dimension (W x H x D) *excluding the antennas
63 x 104.5 x 22 mm (2 1/2 x 4 1/8 x 7/8 inches )

Mass * including batteries
Approx. 205g (7.2 oz)